Custom Dye Sublimation Polo Shirts Perth

Custom Dye Sublimation Polo Shirts Perth

If you've ever considered purchasing custom dye sublimation clothing, but don't know exactly what that means, you're not alone. There are lots of people who have no idea what sublimating means. They might have heard of it from a science magazine, or maybe seen an image on the TV. But they have no idea what it actually entails. In this article, we'll go over what dye sublimation is, and how you might be able to benefit from using it on your own clothing.


Basically, what dye sublimation does is that it "dyes" a piece of fabric so that it has a different color when it's lighted, and a completely different color when its dark. Think of it as the difference between getting a picture lighted and a fluorescent light. What makes dye sublimation so attractive is that it allows you to create a wide range of color temperatures, allowing you to create any type of design that you might want.


Before starting to dye anything, you must load the dye into the dye sublimation gun. This is similar to what's used to dry photographs - it's a pressurized tank that holds dye, and a nozzle that lets you direct the light onto the dye. Once you've loaded the dye into the machine, you'll start the process of sublimating the fabric. Here's a breakdown of how each step in the process works:


- The dye passes through a heat-shield, which prevents it from being too hot when it hits the cloth. Once it reaches the heat-shield, the dye's color changes, and is spread out over the sublimated fabric. This is why you can have different colors in one dye job, if you wanted to. Remember, the dye isn't actually gone until it gets to a temperature of nearly two thousand degrees Fahrenheit.


- You then apply the dye directly to the sublimated fabric. If you have a large design, or a complex pattern to get the dye on, it's advised that you use multiple passes of the dye. Each pass spreads the dye out further, and allows you to get a better finish. The higher number of passes that you need to complete the dye job, the greater amount of money you will have to pay for it.


- Next, you need to place the cloth where you want the dye on your body. The cloth will need to be a specific size, and it will have to stay in this spot while the dye dries. For a full body suit, you should place the cloth in the shower and go as though you were taking a shower. This allows the dye to set properly, without affecting any parts of your body.


- Finally, you should take the dye off of the cloth. Simply take a lint-free cloth and wipe away the excess dye. Repeat this process as many times as necessary to get the job done right. If you don't get all of the dye off of the cloth, you should rinse it under running water, just to be sure. If you don't, you may end up ruining the dye job.


While dyeing clothing by yourself is certainly a great way to save money, it can sometimes end up ruining the dye. This can happen if the directions are not followed, or if you get the dye on something that is too soft. Fortunately, there are professionals out there who can dye clothing for you, taking all the guesswork out of it for you. A professional dye shop can even do a custom dye job that will last for years!


We now supply Nationwide. Items shipped to Sydney, Perth, Adelaide, Brisbane, Melbourne, Hobart, Canberra, Cairns, Newcastle. We can supply custom school leavers, hoodies, jacket, polo shirts, netball dresses, singlets, basketball uniforms, cricket, football, darts, soccer, baseball and much much more. Buy stock polo online in Australia now