Collection: Respirators

Shop respirators in Perth from Flash Uniforms: P2 respirators with and without valves, a reusable twin filter half mask, filter cartridges and pre-filters. The range has 17 products from Pro Choice and JB's Wear, with P2 valved respirators from $12.99 for a 3 pack, all made to AS/NZS 1716 and selected under AS/NZS 1715. Delivered Australia-wide.

Respirator standards in brief

AS/NZS 1716 covers the design and testing of respiratory protective devices, including particulate classes P1 (at least 80% filtration), P2 (at least 94%) and P3 (at least 99.95%). AS/NZS 1715 covers selecting, using and maintaining them, including fit testing. The right choice depends on the contaminant and exposure level, so follow your site's risk assessment.

Fit testing and fit checking

Tight-fitting respirators, including disposable and reusable half masks, must be fit tested by a competent person before first use, for each new make, model and size, and when facial features change. Qualitative testing (pass or fail, by taste or smell) is suitable for disposable masks, while quantitative testing gives a numerical result and is used for half and full-face reusable masks. Keep a record of the test and repeat it based on your risk assessment, commonly every one to two years. Fit check every time you put the respirator on. Any facial hair on the sealing surface prevents a proper seal. See SafeWork SA guidance on fit testing and fit checking.

Cartridges and maintenance

A particulate filter does not protect against gases or vapours, and a gas cartridge has a limited life. Replace particulate filters when breathing becomes harder, or when they are damaged or wet, and replace gas cartridges according to the manufacturer's schedule and your exposure assessment. Clean the facepiece after use, store it in a clean sealed bag, and check straps and valves for wear.

For lighter duty, see our protective masks. Add eye protection and gloves, or browse all PPE.